Home Assistant Home Assistant

Monoprice Blackbird Matrix Switch

The blackbird platform allows you to control Monoprice Blackbird Matrix Switch (8x8) using a serial or IP connection, this integration does not support the 4x4 matrix switch.

To add a Blackbird 8x8 device to your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
media_player:
  - platform: blackbird
    port: /dev/ttyUSB0
    zones:
      1:
        name: Living Room
    sources:
      3:
        name: BluRay

Configuration Variables

Looking for your configuration file?
port string (Exclusive)

The serial port to which Blackbird matrix switch is connected. port and host cannot be specified concurrently.

host string (Exclusive)

The IP address of the Blackbird matrix switch. port and host cannot be specified concurrently.

zones map Required

This is the list of zones available. Valid zones are 1, 2, 3, 4, 5, 6, 7, 8. Each zone must have a name assigned to it.

ZONE_NUMBER string

The name of the zone.

sources map Required

The list of sources available. Valid source numbers are 1, 2, 3, 4, 5, 6, 7, 8. Each source number corresponds to the input number on the Blackbird matrix switch. Similar to zones, each source must have a name assigned to it.

ZONE_NUMBER string

The name of the source.

Service blackbird.set_all_zones

Set all zones to the same input source. This service allows you to immediately synchronize all the TVs in your home. Regardless of entity_id provided, all zones will be updated.

Service data attribute Optional Description
entity_id yes String that points at an entity_id of a zone.
source no String of source name to activate.