Canary
The canary integration allows you to integrate your Canary devices in Home Assistant.
There is currently support for the following device types within Home Assistant:
Configuration
To add the Canary integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Canary.
-
Follow the instructions on screen to complete the setup.
Once loaded, your front end will have the following entities:
- A camera image triggered by motion for each camera.
- An alarm control panel for each location.
- A sensor per camera that reports temperature.
- A sensor per camera that reports humidity.
- A sensor per camera that reports air quality.
Camera
The canary camera platform allows you to watch the live stream of your Canary camera in Home Assistant. This requires the ffmpeg integration to be already configured.
Once you have Canary integration setup, your Canary camera(s) should show up automatically.
Sensor
The canary sensor platform allows you to integrate the sensors of your Canary devices in Home Assistant.
To add canary sensors to your installation, follow instructions above.
Once loaded, you will see following sensors:
- A sensor per camera that reports temperature.
- A sensor per camera that reports humidity.
- A sensor per camera that reports air quality.