Home Assistant Home Assistant

Flexit

Integrates Flexit Air Conditioning unit into Home Assistant.

Requires an CI66 Modbus Adapter CI66

To enable this platform, add the following lines to your configuration.yaml file:

# Example configuration.yaml entry
climate:
  - platform: flexit
    slave: 21

Configuration Variables

Looking for your configuration file?
slave integer Required

The slave ID of the modbus adapter, set using DIP-switches.

name string (Optional)

Displayed name of the A/C unit.

hub string (Optional, default: default)

The name of the hub where this slave is located.

This integration requires the Modbus integration to be set up to work

Full configuration example including modbus setup shown below:

DIP-switch settings on the CI66: 1=ON, 2=ON, 3=OFF, 4=ON, 5=OFF, 6=ON, 7=ON, 8=ON

# Full example configuration.yaml entry
modbus:
  type: serial
  method: rtu
  port: /dev/ttyUSB0
  baudrate: 56000
  stopbits: 1
  bytesize: 8
  parity: E

climate:
  - platform: flexit
    name: Main A/C
    slave: 21