Flic

The flic platform allows you to receive click events from flic smart buttons.

The platform does not directly interact with the buttons, but communicates with a flic service that manages the buttons. The service can run on the same instance as Home Assistant or any other reachable machine.

Service setup

If you are using the Home Assistant Operating System, you can run the service locally by installing the flicd add-on from pschmitt’s repository.

For instructions on how to install the service manually, visit the GitHub repository of the service for Linux, macOS or Windows.

Configuration

To use your flic buttons in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
binary_sensor:
  - platform: flic

Discovery

If discovery is enabled, you can add a new button by pressing it for at least 7 seconds. The button will be paired with the flic service and added to Home Assistant. Otherwise, you have to manually pair it with the flic service. The Home Assistant platform will not scan for new buttons and will only connect to buttons already paired.

Timeout

When the flic button is triggered while disconnected from flic service, it will queue all events and try to connect and transmit them as soon as possible. The timeout variable can be used to stop events from triggering if too much time passed between the action and the notification in Home Assistant.

Events

The flic integration fires flic_click events on the bus. You can capture the events and respond to them in automation scripts like this:

# Example configuration.yaml automation entry
automation:
  - alias: "Turn on lights in the living room when flic is pressed once"
    trigger:
      platform: event
      event_type: flic_click
      event_data:
        button_name: flic_81e4ac74b6d2
        click_type: single
    action:
      service: homeassistant.turn_on
      target:
        entity_id: group.lights_livingroom

Event data:

• button_name: The name of the button, that triggered the event.
• button_address: The Bluetooth address of the button, that triggered the event.
• click_type: The type of click. Possible values are single, double and hold.
• queued_time: The amount of time this event was queued on the button, in seconds.

To help detect and debug flic button clicks, you can use this automation that send a notification on very click type of every button. This example uses the HTML5 push notification platform. Visit the notification integration page for more information on setting up notifications.

automation:
  - alias: "FLIC Html5 notify on every click"
    trigger:
      platform: event
      event_type: flic_click
    action:
      - service: notify.html5
        data:
          title: "flic click"
          message: "flic {{ trigger.event.data.button_name }} was {{ trigger.event.data.click_type }} clicked"

Ignoring Click Types

For some purposes it might make sense to exclude a specific click type from triggering click events. For example when ignoring double clicks, pressing the button twice fast results in two single instead of a double click event. This is very useful for applications where you want to click fast.