Honeywell Total Connect Comfort (US)
The Honeywell integration integrates Home Assistant with US-based Honeywell Total Connect Comfort (TCC) climate systems.
If your system is compatible with this integration, then you will be able access it via https://mytotalconnectcomfort.com/portal/ (note the /portal/).
Configuration
To add the Honeywell Total Connect Comfort (US) integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Honeywell Total Connect Comfort (US).
-
Follow the instructions on screen to complete the setup.
Supported hardware
Home Assistant is integrated with the following devices through https://mytotalconnectcomfort.com/portal/:
- Thermostats
- Every thermostat is exposed as a climate entity
- Known working devices: TH6320R1004, RTH9585WF1004, RTH6580WF
- Sensors
- A Temperature sensor entity.
- A Humidity sensor entity.
- Known working devices: C7089R1013
Others devices like Security systems are not currently supported by this integration
Climate
The climate platform integrates Honeywell US-based thermostats into Home Assistant, allowing control of the thermostat through the user interface. The current inside temperature, operating mode, and fan state are also displayed on the thermostat card.
All climate services are supported except set_swing_mode.
Sensor
The sensor platform integrates outside temperature and outside humidity into Home Assistant as sensors for each device.
This integration will add Home Assistant sensors for the following:
| Sensor | Value |
|---|---|
| Outdoor temperature | Average temperature of all Honeywell Wireless Outdoor Sensors |
| Outdoor humidity | Average humidity of all Honeywell Wireless Outdoor Sensors |