Whirlpool Appliances
The whirlpool integration integrates Whirlpool 6th Sense Live, and Whirlpool/Maytag Washer and Dryer appliances into Home Assistant.
There is currently support for the following device types within Home Assistant:
Supported hardware
The following air conditioners are confirmed to be working, but other models that use the 6th Sense Live application may also work:
Climate:
- SPIW309A2WF/SPIW312A2WF
- SPIW409A2WF
Washer:
- WTW6120HW2
Dryer:
- Not confirmed
Configuration
To add the Whirlpool Appliances integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Whirlpool Appliances.
-
Follow the instructions on screen to complete the setup.
Sensor
The whirlpool sensor platform integrates Whirlpool Washer and Dryer systems into Home Assistant, allowing views of the machine state, time remaining and the “wash & go” tank fill status as sensors for each device.
Climate
The whirlpool climate platform integrates Whirlpool air conditioning systems into Home Assistant, allowing control of the appliance trough the user interface. The current inside temperature is also displayed on the thermostat card.
The following services are also available:
-
set_hvac_mode (
off,heat,cool,fan_only) - target temperature
- turn on/off
-
fan mode (
low,medium,high) -
swing mode (
off,horizontal)