Bbox

The bbox platform uses the Bbox Modem Router from the French Internet provider Bouygues Telecom. Sensors are mainly bandwidth measures.

There is currently support for the following device types within Home Assistant:

Presence Detection
Sensor

Due to third party limitation, the sensors will only be available if Home Assistant and the Bbox are on the same local area network. You can check this by going to 192.168.1.254 with your web browser.

Presence Detection

The bbox platform offers presence detection by looking at connected devices to a Bbox based router from Bouygues, which is one of the main Internet provider in France.

Bbox is a generic name for different hardware routers. The platform has been tested with the following devices:

Sagem F@st 5330b

Configuration

To use an Bbox router in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
device_tracker:
  - platform: bbox

Configuration Variables

Looking for your configuration file?

host string (Optional, default: 192.168.1.254)

IP address of your Bbox device.

For now and due to third party limitation, the Bbox must be on the same local network as the Home Assistant installation.

See the device tracker integration page for instructions how to configure the people to be tracked.

Sensor

To add Bbox sensors to your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
sensor:
  - platform: bbox
    monitored_variables:
      - down_max_bandwidth
      - up_max_bandwidth
      - current_down_bandwidth
      - current_up_bandwidth
      - uptime
      - number_of_reboots