Bond
The Bond integration allows you to control appliances through your Bond Bridge. Duplicates your RF remote control.
Supported devices (see Requirements section below):
- Ceiling fans
- Shades
- Fireplaces
Tested Bond Devices
The following devices have been tested with Home Assistant and confirmed to be working:
- Bond Bridge v1 (snowbird)
- Bond Bridge v2 (zermatt)
- Bond Bridge Pro (zermatt-pro)
- Smart By Bond Fans (breck)
Prerequisites
To use Bond controlled devices in your installation, add your Bond hub host and access token from the integrations page. Instructions for how to obtain an access token can be found on the Bond Local API documentation, which includes a section for how to obtain the IP address of the device which you will need to obtain the access token.
Configuration
To add the Bond integration to your Home Assistant instance, use this My button:
Bond can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.
If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Bond.
-
Follow the instructions on screen to complete the setup.
Requirements
This integration supports Bond bridges with firmware v2.10.x and up. Bond bridges with firmware v2.9.x and lower will not work correctly. Please upgrade your firmware from Bond app before adding this integration.
BPUP Support (Push updates)
Firmware version 2.10.8 or newer is required for push updates. The integration will fallback to polling for 2.10.x versions lower than .8
Service bond.set_fan_speed_tracked_state
Sets the tracked fan speed for a bond fan. Calling this service will change the tracked speed of the fan but not transmit any signal to make the device change speed.
| Service data attribute | Optional | Description |
|---|---|---|
entity_id |
no | String or list of strings of entity_ids. |
speed |
no | Speed as a percentage. |
Service bond.set_switch_power_tracked_state
Sets the tracked power state of a bond switch. Calling this service will change the tracked power state of any bond switch but not transmit any signal to make the device change its state.
| Service data attribute | Optional | Description |
|---|---|---|
entity_id |
no | String or list of strings of entity_ids. |
power_state |
no | Boolean power state. |
Service bond.set_light_power_tracked_state
Sets the tracked power state of a bond light. Calling this service will change the tracked power state of any bond light but not transmit any signal to make the device change its state.
| Service data attribute | Optional | Description |
|---|---|---|
entity_id |
no | String or list of strings of entity_ids. |
power_state |
no | Boolean power state. |
Service bond.set_light_brightness_tracked_state
Sets the tracked brightness state of a bond light Calling this service will change the tracked brightness state of any bond light but not transmit any signal to make the device change its state.
| Service data attribute | Optional | Description |
|---|---|---|
entity_id |
no | String or list of strings of entity_ids. |
brightness |
no | brightness as an integer between 0 and 255 |