Dormakaba dKey
Integrates Dormakaba dKey Bluetooth Low Energy connected locks into Home Assistant.
Configuration
To add the Dormakaba dKey integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Dormakaba dKey.
-
Follow the instructions on screen to complete the setup.
In addition to a lock entity, each added dKey lock will also have:
- A battery sensor
- A binary_sensor which shows if the door is open or not
- A binary_sensor which shows the position of the lock’s dead bolt