Home Assistant Home Assistant

Edimax

This edimax switch platform allows you to control the state of your Edimax switches.

To use your Edimax switch in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
switch:
  - platform: edimax
    host: 192.168.1.32

Configuration Variables

Looking for your configuration file?
host string Required

The IP address of your Edimax switch, e.g., 192.168.1.32.

username string (Optional, default: admin)

Your username for the Edimax switch.

password string (Optional, default: 1234)

Your password for the Edimax switch.

name string (Optional, default: Edimax Smart Plug)

The name to use when displaying this switch.

Power consumption sensor

Starting with version 2 of the firmware, the Edimax switches can also report the current and accumulated daily power consumption in their state objects. Use a template sensor to extract their values:

template:
  - sensor:
    - name: Edimax Current power consumption
      unit_of_measurement: "W"
      state: "{{ state_attr('switch.edimax_smart_plug', 'current_power_w') | default(0, true) }}"
      
    - name: Edimax Accumulated daily power consumption
      unit_of_measurement: "kWh"
      state: "{{ state_attr('switch.edimax_smart_plug', 'today_energy_kwh') | default(0, true) }}"

Note that if the smart plug is off, these states report the string None. By using a replace() in the template, these sensors report purely numerical values.