Home Assistant Home Assistant

IDTECK Proximity Reader

IDTECK makes ID systems used to control access and identify users. This integration works with Proximity Readers (RFID card readers). The device is connected to Home Assistant through a serial to ethernet converter (NPort).

An idteck_prox_keycard event is fired whenever a card or key sequence has been entered. The event contains ‘card’ - the card/key sequence, and the ‘name’ of the card reader. Checking ‘card’ against known card numbers can be used as the basis of an entry control system, or as part of a check-in/check-out system.

Configuration

# Example configuration.yaml entry
idteck_prox:
  - host: host1.domain.com
    port: 4001
    name: "Lower Door"
  - host: host2.domain.com
    port: 4001
    name: "Upper Door"

Configuration Variables

Looking for your configuration file?
host string Required

The hostname or IP address of the ethernet to serial adapter that is connected to the proximity reader. It is assumed that the adapter has been preconfigured.

port integer Required

The port of the ethernet to serial adapter

name string Required

The name of the prox card reader